Mobile Batch Plants

Whether for temporary installation, special projects or permanent facilities, the mobile concrete batch plants by BMH Systems provide an economical and reliable solution. These mobile plants have the advantage of being deployed in just a matter of days. Dry batch and central mix plants are available in a variety of aggregate and cement storage configurations and batch sizes. Whenever space limitations, fast set-up or easy moving are concerned, a BMH mobile batch plant is the optimal solution.

characteristics :

  • Low profile and high mobility batch plant
  • Quick and easy set-up
  • No foundation/erection required, blocking only
  • Telescopic legs
  • Heavy duty frame
  • Factory wired, plumbed and tested

Whether for a temporary installation, a special project or for a permanent facility, the EG-10 and EG-10MX mobile concrete batch plants by BMH Systems are designed for optimal performance and reliability.

Our exclusive mobile plants need no concrete foundation and are ready for use in a snap. This economical system makes no compromise on quality, versatility or performance. All components used in our mobile plants are designed from the start to perform with outstanding results. In the long run it means minimum maintenance, less downtime and better access for servicing.

Specifications EG-10

Production capacity up to 200 yd³ (150 m³) per hour

Features

  • Low profile and high mobility batch plant
  • Easy and quick set up time
  • No foundation/erection required, blocking only
  • Telescopic legs
  • Aggregate bin, 4 compartments, 110 tons (100 metric tons)
  • Direct front end loader charging of aggregates
  • Cement bin, single compartment, 60 tons (55 metric tons)
  • Cement bin aeration system
  • Electromatic high and low level sensors, capacitance type
  • Dust collector for cement bin
  • Screw conveyors, 12" diameter (300 mm)
  • Air compressor, 15 hp (11 kW)
  • Aggregate belt conveyor, 42" (1 100 mm) ribbed belt
  • Aggregate and cement scales, 12 yd³ (9 m³)
  • Water meter, 4" m (75 mm) with slow feed valve
  • Power panel
  • Heavy duty frame, tri-axle, radial tires
  • Pneumatic suspension, ABS brakes, lights and standard fifth wheel/king pin towing assembly
  • Macropoxy primer with Shertane urethane nickel gray paint; safety yellow for safety equipment
  • Factory wired, plumbed and tested

Batching Control

  • Manual panel

Electrical Power

  • Power panel 460 or 575 volts
  • Other voltage available upon request

Travel Dimensions

  • 65'-3" long (19,9 m)
  • 14' wide (4,3 m)
  • 14'-5" high (4,4 m)

Weight

  • 78,500 lb (35 600 kg)

Options

  • Computerized batch control system
  • Moisture probe
  • Auxiliary cement silos
  • Mobility system for auxiliary silos
  • Dust collection system
  • Safety guards

Specifications EG-10MX

Production capacity up to 250 yd³ (190 m³) per hour

Features

  • Low profile and high mobility batch plant
  • Easy and quick set up time
  • No foundation/erection required, blocking only
  • Telescopic legs
  • RollMaster® reversing variable speed drum mixer, 6 yd³, 8 yd³, or 12 yd³ (4.5 m³, 6 m³ or 9 m³) complete with steel structure, service platform, safety guards and access stairway
  • Aggregate bin, 4 compartments, 110 tons (100 metric tons)
  • Direct front end loader charging of aggregates
  • Cement bin, single compartment, 60 tons (55 metric tons)
  • Cement bin aeration system
  • Electromatic high and low level sensors, capacitance type
  • Dust collection system, cement bin
  • Screw conveyors, 12" diameter (300 mm)
  • Air compressor, 15 hp (11 kW)
  • Aggregate belt conveyor, 42" (1 100 mm) ribbed belt
  • Aggregate and cement scales, 12 yd³ (9 m³)
  • Water system, 4" (100 mm)  with slow feed valve
  • Power panel
  • Heavy duty frame, tri-axle, radial tires
  • Pneumatic suspension, ABS brakes, lights and standard fifth wheel/king pin towing assembly
  • Macropoxy primer with Shertane urethane nickel gray paint; safety yellow for safety equipment
  • Factory wired, plumbed and tested

Batching Control

  • Manual panel

Electrical Power

  • Power panel 460 or 575 volts
  • Other voltage available upon request

Travel Dimensions

  • 65'-3" long (19,9 m)
  • 14' wide (4,3 m)
  • 14'-5" high (4,5 m)

Weight

  • 78,500 lb (35 600 kg) for mobile batch plant
  • 78,000 lb (35 380.2 kg) for mobile mixer

Options

  • Emergency motors
  • Dust collection system for mixer
  • Computerized batch control system
  • Moisture probe
  • Auxiliary cement silos
  • Mobility system for auxiliary cement silos

The EG-8 model is based on years of field experience and is set to produce 130 yd³ per hour of dry mix material. Its size, quality of construction, quick set up and versatility provides you absolute mobility to any job site.

All BMH mobile plants need no concrete foundation and are ready for use in a snap. This economical system and proven design makes no compromise on quality, versatility or performance. All components used in our mobile plants are designed from the start to perform with outstanding results. In the long run, it means reliable equipment, true production output with controlled batch mixes for satisfied customers

Specifications EG-8

Nominal production capacity is 130 yd³ (100 m³) per hour

FEATURES

  • Batch plant nominal production capacity is 130 yd³ (100 m³) per hour
  • No foundation/erection required
  • Telescopic legs
  • Aggregate bin, 3 compartments, 70 Tons total (65 metric tons)
  • Direct front end loader charging
  • Cement bin, single compartment, 40 Tons (35 metric tons)
  • Low and high level sensors for cement bin
  • Dust collector (cement bin)
  • 36" (900 mm) belt conveyor feeding system, 10" (250 mm) screw conveyors
  • Aggregate and cement scale of 10 yd³ (7.5 m³)
  • Water meter, 3" (75 mm)
  • Heavy duty frame, tandem axle and radial tires with pneumatic suspension and ABS brakes
  • Macropoxy primer with Shertane urethane nickel gray paint
  • Factory wired, piped and tested
  • 10 hp (7.5 kW) air compressor

Batching Control

  • Manual panel

Electrical Power

  • Power panel 460 or 575 volts
  • Can be used with a 100 kVA generator

Travel Dimensions

  • 56'-7" long (17.3 m)
  • 12' wide (3.7 m)
  • 14' high (4.3 m)

Weight

  • 57,000 lb (25,850 kg)

Options

  • Computerized batch control system
  • Mobile batch office / admixtures storage
  • Moisture probe
  • Auxiliary cement silo
  • Mobility system for auxiliary silo
  • Dust collection system (loading area)
  • Safety Guards

Whether for a temporary installation, a special project or for a permanent facility, the mobile concrete batch plants by BMH Systems are designed for optimal performance. Our exclusive mobile plants need no concrete foundation and are ready for use in a snap.

Any load size can be processed from the scale-mounted aggregate hoppers and cement bin. This economical system makes no compromise on quality, versatility or performance.

All components used in our mobile plants are designed from the start to perform with outstanding results.

Specifications DEC-50

Production capacity 65 yd³ (50 m³) per hour

Features

  • Low profile high mobility
  • Decumulative batching
  • Quick set up time
  • No foundation/erection required, blocking only
  • Telescopic legs
  • Aggregate bin, 44 tons (40 metric tons), 2 compartments
  • Direct front end loader charging of aggregates
  • Cement bin, 33 tons (30 metric tons)
  • Cement delivery: 2 screw conveyors, 10" (250 mm) diameter, 24'-0" (7,3 m) long, with 10 hp (7,5 kW) motors
  • Transfer belt, 30" ribbed (760 mm)
  • Electronic water meter, 2" (50 mm)
  • Air compressor, 5 hp (3,7 kW)
  • Air brakes, single axle, double wheels and fifth wheel
  • Signal, brake and tail lights
  • Factory wired and plumbed
  • Factory tested

Aggregate Bin

  • 20'-0" long (6,1 m)
  • 8'-0" wide (2,4 m)
  • 10'-3" high (3,1 m)

Weighing System

  • 2 digital weigh indicators
  • Cement bin mounted on 4 load cells of 25 000 lb each (11 400 kg)
  • Aggregate bin mounted on 4 load cells of 25 000 lb each (11 400 kg)

Weight

  • 32 000 lb (14 500 kg)

Batching Control

  • Manual electric/air

Electrical Power

  • Power panel, 460 or 575 Volts
  • Other voltage available upon request

Travel Dimensions

  • 55'-4" long (16,9 m)
  • 8'-6" wide (2,6 m)
  • 14'-2" high (4,4 m)

Options

  • Cement bin extension, 11 tons (10 metric tons)
  • 3 aggregates compartments with a total capacity of 44 tons (40 metric tons)
  • Tandem axle, double wheel assembly
  • Decumulative mobile cement bin, 33 tons (30 metric tons)
  • Computerized batch control system
  • Dust collector for cement bin
  • Moisture probe
  • Diesel generator power
  • Cement bulk bag handling system