Twin-Shaft – Ready-Mix
► Up to 2.6 – 24 yd3 (2 – 18m3)
HD High Performance
► Mining duty construction for the RMC industry
► Advanced paddle configuration and innovation
► This mixing tool arrangement allows for the creation of an uninterrupted spiral on each mixing shaft.
► The mixing process takes place in the centre of the mixer, thereby reducing wear zone and allowing for the rapid mixture of batch ingredients.
► The intensive material mixture occurs in the turbulent overlap area of the two mixing circles in a rapid movement allowing material to move quickly throughout the mixer during the entire mixing process.
► 0.7’’ (18 mm) wear plates
► Wide range of models from 2.6 yd³ (2 m3) to 24 yd³ (18 m3)
► Cast tiles with 610 BHN, for maximum longevity
► Stone or material sizes up to 7’’ (180 mm)
► Replacement parts are available worldwide
► Specifically designed for efficient cement dispersion in slurries
► Powerful gearboxes for maximum power
► Centralized automatic greasing system for seals and bearings with working pressure up to 4,300 psi
► Specially designed mixing arms to reduce wear and encourage spiral concept mixing at slower speeds
► Profiled mixer cover to prevent build-ups and reduce cleaning time
► Double paddle arrangement for more mixing efficiency
► High-pressure cleaning system
► Customization of your mixer to suit your unique needs
► Multiple discharge opening with actuators and independent hydraulic group
Mixing principle: advantage of Spiral Mixing Concept
Profiled mixer cover
Our profiled mixer cover is designed to follow the path of the mixing tools to enable them to clean the inside of the cover. This prevents build-up and reduces the risk of dried “chunks“ falling into the mixer and blocking the pump or the borehole.